Data Cables

Mini SAS SFF-8087 to 4x SATA forward breakout cables connect a single Mini SAS port on a RAID controller, HBA card, or motherboard to four individual SATA drives or a backplane. These internal cables support high-speed data transfer up to 6Gbps per channel and are commonly used in servers, NAS builds, and home storage setups. They feature a forward (host-to-drive) configuration with 100-ohm impedance and flexible ribbon designs for better cable management. Key SpecificationsConnector A: SFF-8087 Mini SAS (36-pin male). Connector B: 4x SATA 7-pin (data only; power supplied separately). Length: Typically 0.5m (1.6ft) to 1m for internal use. Compatibility: Works with SATA drives (SAS controllers support SATA); exceeds SAS 1.1/2.0 specs. Common UsesLinking RAID/HBA cards to SATA HDDs/SSDs in home servers or NAS. Server racks, direct-attached storage (DAS), and data centers. Not reversible for backplane-to-host without proper wiring.

A USB 3.0 active extension cable is a USB male–female cable with built‑in electronics that boosts the signal so you can run longer lengths (typically 5–15 m) without data errors or drop‑outs. What it is A USB 3.0 active extension has a chipset in the cable that amplifies/conditions the signal, unlike passive extensions that simply extend the wires. It lets you go far beyond the usual 2–3 m USB limit while still supporting up to 5 Gbps transfer rates for USB 3.0 devices. Typical lengths and usesCommon active USB 3.0 extenders are available in 5 m, 10 m and up to 15 m versions. They are widely used for webcams, VR headsets (Quest/Steam VR), printers, hard drives, and game consoles where the PC is far from the device. Key features to look forBuilt‑in signal booster/repeater and USB 3.0 compliance (5 Gbps). Good shielding and build (triple‑shielded, gold‑plated connectors) to reduce interference over long runs. Some models offer optional external power input to help with power‑...